INS_FVT/FVR40D4SFP_REV–
03/31/10
PAGE 1
INSTALLATION AND OPERATION MANUAL
FVT/FVR40D4SFP
4-CHANNEL 10-BIT DIGITAL VIDEO WITH
4 BI-DIRECTIONAL DATA CHANNELS WITH
SMALL FORM-FACTOR PLUGGABLE OPTICAL DEVICES
The FVT/FVR40D4SFP series optical video link provides transmission of four
10-bit medium-haul quality digital video channels and four bi-directional data
channels through a selectable small form factor pluggable module (SFP).
Figure 4
on
Page 3
illustrates the data electrical connections from the RJ45 Data
connectors and also the connection cable and “breakout box” connections.
Figure 5
on
Page 4
illustrates the specific data connections for RS232, 2-Wire
RS485 and RS422/4-Wire RS485. (This last data connection also applies to
Manchester & Bi-Phase data transmission.)
Each data channel is configured for the electrical interface by means of the
“DATA SELECT” switch on the front panel.
Figure 6
on
Page 4
illustrates the
switch settings to set the type of data for each channel.
Figure 7
on
Page 5
illustrates the electrical connections between the
“Customer Equipment” and the FVT40D4SFP and FVR40D4.SFP.
Bi-color (Red/Green) LED indicators are provided for confirming operating
status. See
Figure 8
on
Page 5
for LED indication explanations.
These units are interchangeable between stand-alone or card mount
configurations. See
Figure A
on
Page 6
for mounting instructions.
