© 2013 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [email protected]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected]
MECHANICAL INSTALLATION INSTRUCTIONS
FIGURE A
Dimensions are for a ComNet™ FVT10C1 module
INSTALLATION CONSIDERATIONS
This fiber-optic link is supplied as a Standalone/Surface Mount module.
Units should be installed in dry locations protected from extremes of
temperature and humidity.
WARNING
: Unit is to be used with a Listed Class 2 or LPS power supply.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient
- If installed in a closed or multi-
unit rack assembly, the operating ambient temperature of the
rack environment may be greater than room ambient. Therefore,
consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature
(Tma) specified by the manufacturer.
B) Reduced Air Flow
- Installation of the equipment in a rack should
be such that the amount of air flow required for safe operation of the
equipment is not compromised.
4.5in
(11.7cm)
2.2in
(5.5cm)
1.1in
(2.7cm)
