Comnet CWGE2FE8MSPOE, Инструкция по установке и эксплуатации

Страница: 78 / 143

71
IP Security
IP security function allows the user to assign 10 specific IP addresses that have
permission to manage the switch through the http and telnet services for the securing
switch management. The purpose of giving the limited IP addresses permission is to allow
only the authorized personnel/device can do the management task on the switch.
 IP Security Mode: Having set this selection item in the Enable mode, the Enable
HTTP Server , Enable Telnet Server checkboxes and the ten security IP column
fields will then be available. If not, those items will appear in grey.
 Enable HTTP Server: Having ticked this checkbox, the devices whose IP addresses
match any one of the ten IP addresses in the Security IP1 ~ IP10 table will be given
the permission to access this switch via HTTP service.
 Enable Telnet Server: Having ticked this checkbox, the devices whose IP addresses
match any one of the ten IP addresses in the Security IP1 ~ IP10 table will be given
the permission to access this switch via telnet service.

Security IP 1 ~ 10: The system allows the user to assign up to 10 specific IP
addresses for access security. Only these 10 IP addresses can access and manage
the switch through the HTTP/Telnet service once IP Security Mode is enabled.
 And then, click to have the configuration take effect.
[NOTE] Remember to execute the “Save Configuration” action, otherwise the new
configuration will lose when the switch powers off.