INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 32
INSTALLATION AND OPERATION MANUAL
CWGE28FX4TX24MS
TECH SUPPORT: 1.888.678.9427
LACP Port Configuration
This page allows the user to inspect the current LACP port configurations, and change as
required.
.
.
.
Label
Description
Port
Indicates the group ID for the settings contained in the same row. Group ID “Normal”
indicates there is no aggregation. Only one group ID is valid per port.
LACP Enabled
Each switch port is listed for each group ID. Select a radio button to include a port in
an aggregation, or clear the radio button to remove the port from the aggregation. By
default, no ports belong to any aggregation group. Only full duplex ports can join an
aggregation and ports must be in the same speed in each group.
Key
The key value incurred by the port, range 1-65535. The Auto setting will set the key
as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the
specific setting, a user-defined value can be entered. Ports with the same key value can
participate in the same aggregation group, while ports with different keys cannot.
Role
The role shows the LACP activity status. The active will transmit LACP packets each
second, while passive will wait for a LACP packet from a partner (communicate if
communicated to).
Save
Save changes.
Reset
Click to undo any changes made locally and revert to previously saved values.
