INS_CWFE100(X) POE SERIES_REVA
08/10/11
PAGE 7
© 2013 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIvE | DANbURy, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECh SUPPORT: 1.888.678.9427 | [email protected]
8 TURNbERRy PARK ROAD | GILDERSOME | MORLEy | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected]
INSTALLATION CONSIDERATIONS
this unit is supplied as a Standalone module. Units should be installed in
dry locations protected from extremes of temperature and humidity.
WARNING
: Unit is to be used with a Listed Class 2 power supply.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient
- Consideration should be given to installing
the equipment in an environment compatible with the maximum ambient
temperature (t
ma
) specified by the manufacturer.
b) Reduced Air Flow
- Installation of the equipment should be such that
the amount of air flow required for safe operation of the equipment is not
compromised.
MEChANICAL INSTALLATION INSTRUCTIONS
FIGURE A
Dimensions are for a small size ComNet™ surface mount module
