manualshive.com logo in svg

Comnet CNGE28FX4TX24MSPOE+, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CNGE28FX4TX24MSPOE+ Скачать руководство пользователя страница 88

inS_CnGE28FX4TX_rEv–

08/31/12     PAGE 88

INSTALLATION AND OPERATION MANUAL 

CNGE28FX4TX

Tech SupporT: 1.888.678.9427

Power over Ethernet (PoE) 

PoE Configuration - Reserved Power determined 

There are three modes for configuring how the ports/PDs may reserve power. 

Label

Description

Allocated mode In this mode the user allocates the amount of power that each port 

may reserve. The allocated/reserved power for each port/PD is 
specified in the Maximum Power fields.

Class mode

In this mode each port automatic determines how much power to 
reserve according to the class the connected PD belongs to, and 
reserves the power accordingly. Three different port classes exist and 
one for 4, 7 and 15.4 Watts. (In this mode the Maximum Power fields 
have no effect.)

LLDP-MED mode This mode is similar to the Class mode expect that each port 

determine the amount power it reserves by exchanging PoE 
information using the LLDP protocol and reserves power accordingly. 
If no LLDP information is available for a port, the port will reserve 
power using the class mode.( In this mode the Maximum Power fields 
have no effect)

For all modes:  If a port uses more power than the reserved power for the port, the port is shut 

down.

Содержание CNGE28FX4TX24MSPOE+

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды