IN2SMS_REV– 02/19/13 PAGE 37
INSTALLATION AND OPERATION MANUAL
CNGE2+2SMS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Network Interface Configuration
Interface Configuration interface
Label
Description
Host Name
Assign a name to the device (this is used for CLI and SNMP functions)
Enable DHCP
To enable or disable the DHCP client function. When DHCP client
function is enabled, the switch will be assigned the IP address from the
network DHCP server. The default IP address will be replaced by the IP
address which the DHCP server has assigned.
IP Address
Assign the IP address that the switch will use. If DHCP client Function is
enabled, you do not need to assign the IP address.
Gateway
Assign the network gateway for the switch.
Subnet Mask
Assign the subnet mask for the switch.
Primary DNS
Assign the primary DNS IP address
Secondary DNS
Assign the secondary DNS IP address
Apply
Select Apply to set the configurations.
Important Note: A system reset must be performed after making changes to the network
settings.
