INS_CNFE100(X)-A_REV–
06/21/11
PAGE 3
© 2011 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIvE | DANbURy, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECh SUPPORT: 1.888.678.9427 | [email protected]
8 TURNbERRy PARk ROAD | GILDERSOME | MORLEy | LEEDS, Uk LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected]
MEChANICAL INSTALLATION INSTRUCTIONS
INSTALLATION CONSIDERATIONS
this fiber-optic link is supplied as an in-dome mountable module.
Units should be installed in dry locations protected from extremes of
temperature and humidity.
WARNING
: Unit is to be used with a Listed Class 2 or LPS power supply rated
9-12 VdC @ 1A.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient
- Consideration should be given to installing
the equipment in an environment compatible with the maximum ambient
temperature (tma) specified by the manufacturer.
b) Reduced Air Flow
- Installation of the equipment should be such that
the amount of air flow required for safe operation of the equipment is not
compromised.
FIGURE 6 – LED INDICATORS
LINk
POWER
GREEN
Ethernet link has
been established at
the RJ45 connector.
Unit powered up
OFF
Unit Powered down
