18
8. Press
the
C/M key twice to exit Special Call mode.
Recalling Stored Individual (LID) and Phone
Numbers
The special call mode must be exited to initiate the recall
procedure
1. Press
the
# key for an individual (LID) call or the * key
for a phone call.
2. Enter the desired storage location number (0-9).
3. Press
the
C/M key and then press the #/RCL key. Up
to four digits of the number (the last four digits of a
telephone number) will be displayed in the GRP field.
4. Individual (LID) Call: Press and hold the PTT button to
initiate the call. When signaling is complete, the
“TX” and “BSY” icons are displayed and the Call
Originate tone sounds. While still depressing the
PTT button, speak into the microphone.
Phone Call: Press and release the PTT button to
initiate the call. When signaling is complete, the
“BSY” icon is displayed and DTMF tones are sent.
When the receiving party answers the call, press
and hold the PTT button and speak into microphone.
5. Release the PTT button when the transmission is
complete. Wait for reply.
NOTE
Содержание EDACS 300P
