M300 Pro GNSS Receiver User Guide
5
device(meteorological
sensor/barograph/inclinometer)
• 1 DB9 male port
- Standard RS232 protocol
• 1 Standard USB port,
- Connect with external storage card
• 1 RJ45 LAN Ethe17rnet port (10/100M
Bit) supports
protocols HTTP, HTTPS, TCP/IP, UDP,
FTP, NTRIP
• 3 SMA male connectors
- 1 PPS output
- Event input
- Reserve for WLAN and Bluetooth
• 2 TNC connectors
- GNSS Antenna connector
- Frequency-marker oscillator input
connector
Data Format
• Correction data I/O:
- RTCM 2.x, 3.x, RTCM3.2, MSM4,
MSM5, CMR (GPS only), CMR+(GPS only)
• Positioning data outputs:
- ASCII: NMEA-0183 GSV, RMC, HDT,
VHD, GGA, GSA, ZDA,
VTG, GST, PJK, PTNL
hours continuously working
Antenna
• AT330 GNSS Geodetic Antenna
• AT500 GNSS Choke Ring Antenna
User Interface
• Button and front LCD panel
- 5 functional buttons on the left and 3
buttons on the right
- LCD panel shows the status and
setting
• ComNav M300 Pro Web Server
M300 Pro
Specifications subject to change
without notice.
2.3 M300Pro Basic Kit
The table below provides an overview of items included in the M300Pro basic Kit.
