Page 6
VLF Owner's Guide
V SERIES models
RIGGING / SUSPENSION AND SAFETY
The terms “rigging”, “flying” and “suspension” are often used interchangeably
in describing methods of installing loudspeaker systems at elevated positions.
IMPORTANT NOTES ON RIGGING LOUDSPEAKERS
There are three areas of responsibility for rigging loudspeakers. The first is
the building structure. Always consult with the building architect or structural
engineer to assure the ability of the structure to support the loudspeaker
system. The second area of responsibility is the loudspeaker itself. Community
certifies its loudspeaker systems and rigging accessories for suspension when
they are properly installed according to our published guidelines. The third
area of responsibility is everything between the loudspeaker and the building
structure and the actual process of installation. The installing contractor
assumes this responsibility. Loudspeaker rigging should be performed only by
certified rigging professionals using certified rigging hardware chosen for the
specific application. Prior to installation, the contractor should present a rigging
plan, with drawing and detailed parts list, to a licensed structural engineer (P.E.)
or architect for written approval.
DANGER:
Some of the loudspeakers described in this manual are may be
suspended using a variety of rigging hardware, means, and methods. It is
essential that all installation work involving the suspension of these
loudspeaker products be performed by competent, knowledgeable persons
who understand safe rigging practices. Severe injury and/or loss of life may
occur if these products are improperly suspended.
DANGER:
All rigging fittings must remain sealed with the included flat-
head Allen screws or they must be fitted with properly rated optional
mounting hardware. Any missing fasteners will compromise the
structural integrity of the enclosure and constitute a safety hazard. Do not
suspend this loudspeaker unless all fasteners are securely in place!
WARNING - NON-COMMUNITY RIGGING HARDWARE:
Non-Community
hardware used for rigging the V SERIES subwoofers must be certified by
the supplier for this use and must be properly rated for safety.
