Community R6-51 & R6-BASSHORN Installation / Operation Manual — Page 17
RIGGING CONSIDERATIONS
which allows the load applied to the threaded inserts on the loudspeaker enclosure to minimize off-axis stresses,
thus preserving the integrity of the insert point. When using Hoist Rings the same precautions should be taken to
properly seat the Hoist Ring as when seating a shoulder eye-bolt. Hoist Rings are not normally found in
hardware stores but can readily be obtained from industrial suppliers.
IMPORTANT:
As with all aspects of mounting and rigging loudspeakers, the use of eyebolts, hoist
rings, and other safety cabling hardware should be included in a rigging plan that has been reviewed
and approved by a licensed P.E. (Professional Engineer).
IMPORTANT:
The mounting bolts that are supplied and installed in each enclosure must either be used
for mounting or they must remain in place. If the rigging fittings are not sealed, air leaks will occur in the
enclosure that will compromise the loudspeaker’s weather-resistance and its low frequency
performance.
IMPORTANT
: Eyebolts, brackets, and any other mounting hardware for outdoor usage with R-Series
loudspeakers must be corrosion resistant steel, properly rated for the load weight.
DIMENSIONS OF R6-51
DIMENSIONS OF R6-BASSHORN
