I SERIES
Community Professional Loudspeakers
communitypro.com
IVY1082-2082 Manual 01JUL2016
GENERAL ASSEMBLY INFORMATION
The I SERIES Compact U-Brackets and Vertical Yokes can be used in
conjunction with the larger IP or IS (I SERIES Point Source or Subwoofers)
in many of the same applications. They can be mounted to BalancePoint™
Flyware rails and isometric frames. Refer to the "Mounting Compatibility
detail on the previous page for mounting point descriptions.
TOOLS NEEDED FOR ASSEMBLY:
• Metric socket and ratchet set
• Metric wrench set
• Metric hex key set
SAFETY CABLES
IMPORTANT:
Attach a safety cable to one of the unused mounting points
on the loudspeaker (and/or the bracket assembly). Safety cables must
be secured to a suitable load-bearing point separate from the loudspeaker
mounting point, with as little slack as possible, oriented to minimize dynamic
swinging of the load, so as not to develop undue shock or kinetic force if the
loudspeaker mount were to fail. Safety cables and hardware are not included.
Please consult a structural engineer for the appropriate cables, hardware, and
location(s) for the load and application.
Hardware and Parts:
There is a key at the beginning of each instruction
that shows the parts, their quantity and abbreviation. We also use a
shortened code for the hardware that offers an easy reference to the
type, diameter and approximate length.
ex: HW1 = Hardware Washer 10mm;
HH1-3 = Hardware, Hex head bolt, 10 x 35mm
IMPORTANT:
The flat head bolts that come installed in each
enclosure must remain in place or be replaced by a threaded
fastener from an array bracket. The bolts attach to internal metal
brackets that are critical to the structural integrity and rated Safe Working
Load (SWL) of each point and each array assembly. Failure to include a
fastener in every location could lead to serious injury, or even death.
HELPFUL INSTALLATION TIPS
• The U-Brackets and Vertical Yokes have hole patterns compatible with BalancePoint™ Flyware rails and
frames, and are also compatible with many third party manufacturers'' speaker stand adapter plates.
Refer to our reference table or manufacturer's website for details. Refer to the cross reference chart
(next page) and manufacturer's website for details.
• Contact our Technical Assistance Group (TAG) for additional guidance by phone: (610) 876-3400 or email:
Typical placement for
safety cable and hardware
(eyebolt not included)
The loudspeaker enclosure must
have fasteners in all threaded holes
LOUDSPEAKER WEIGHTS
COMPACT
Indoor [lbs (kg)]
Low Impedance
Indoor [lbs (kg)]
Transformer
WR [lbs (kg)]
Weather-Resistant
WT [lbs (kg)]
WR Transformer
IC6-1082
25.0 (11.3)
29.0(13.2)
19.2(8.7)
23.2 (10.5)
IC6-2082
31.0 (14.1)
35.0 (15.9)
23.9 (10.8)
27.9 (12.7)
