Community DXP4800, Руководство пользователя

Страница: 14 / 21

ƒ
SAMPLING RATE: - Sampling Rate selection. The unit can operate under 48kHz or
96kHz sampling rate according to this option. The device has to be shut down and
turned back on for the hardware effect to take place. For 96kHz operation, crossover
slopes can be up to 24dB/Oct only, while 48kHz gives crossover slopes to 48dB/Oct.
Security - Security Locks
The DXP4800 enables the user to secure the unit and prevent undesired changes in the setup.
In order to switch between the security level the user must enter the correct password.
SYSTEM-SETUP MENU:Security
MENU:In-Signal
LOCK:No
PASSWORD:XXXX
ƒ
MENU - Selects the menu to be locked/unlocked. The options are:
•
In-Signal - Input Signal Menu (Level, Polarity, Delay).
•
In-EQ - Input EQ Menu.
•
In-Name - Input Channel Name Menu.
•
Out-Signal - Output Signal Menu (Level, Polarity, Delay).
•
Out-EQ - Output EQ Menu.
•
Out-Xover - Output Crossover Menu.
•
Out-Limit - Output Limit Menu.
•
Out-Source - Output Source Menu.
•
Out-Name - Output Channel Name Menu.
•
System - System Menu.
ƒ
LOCK - Selects to lock (Yes) or unlock (No) the corresponding menu.
ƒ
PASSWORD – The password of the DXP4800 is 4 characters in length. The user can
change it via the PC application software. The factory default of a new unit does not
require a password.
Community DXP4800 Owner’s Manual Page 14