Community Distributed Design D10, Инструкция по установке, эксплуатации и техническому обслуживанию

Страница: 8 / 36

Community Distributed Design Series Installation and Operation Manual Page 8
Option 1: Full Ceiling Loudspeaker Assembly*
( Models: D4LP, D4, D5, D6, D8, D10, D10SUB)
• Ceiling Loudspeaker Assembly (Qty 2)
• Back cans (Qty 2)
• Tile Support Bridge Rails (Qty 4)
Figure 1 Full Ceiling Loudspeaker assembly package contents (typical)
Loudspeakers
(secured in their back cans)
Tile Support Bridge Rails
C-Ring Support
Plates
Flat screwdriver
Cut-out
Template
Paint Masks
• Grilles (Qty 2)
• C-Ring Support Plates (Qty 2)
• Cut-out template (can-sized) (Qty 1)
• Paint Masks (Qty 2)
• Flat screwdriver (Qty 1) (for screws, con-
nectors and to help remove the grille)
Grilles
Note: These illustrations are typical. The actual parts appearance differs somewhat among the
various models in this series.