COMMUNICATIONS-APPLIED TECHNOLOGY ICRI/2P, Инструкция по установке и эксплуатации

Страница: 4 / 30

- 4 -
Pre-Operational Activities
Some pre-planning is necessary to ready the ICRI for rapid deployment. The following should be
accounted for before placing the ICRI on-line:
1. Determine what the power source will be for the ICRI. Verify that the internal battery is
charged or that one of the external power source option are available
*
.
2. Determine what brand and model of radios will be connected to the ICRI and that an
“interface” cable for each radio is available.
3. If radios are not maintained with the ICRI, advise participating agencies that they will need to
supply a “spare” radio, for the radio interoperability.
4. Verify that the radios are known to operate properly and have at least one fully charged battery
or other reliable power source.
*
Among the power sources that can be used to power the ICRI are:

12 volt vehicle battery

Vehicle cigarette lighter

115v AC (with an external adapter)
 BA590 “military”

Commercial dry-cell or other battery (7.2V up to20V DC, minimum 10.5V to charge
internal battery pack)

C-AT 12 volt battery pack (uses 8 “AA” batteries)
The ICRI’s internal regulated power supply is reverse polarity protected, but it is important to check
polarity of DC supplies before connecting them to the ICRI.