Communication-Applied Technologies ICRI-2P, Руководство пользователя, Страница: 8 / 34

- 8 -
Rear Panel
FIGURE 3: REAR PANEL
RJ22 TELEPHONE JACK: A
This RJ22 (4 wires) jack supports the connection of the ICRI to a land-line telephone through the
telephone’s handset wiring (using the coiled cord between the telephone’s base with touchpad and
the handset) or the 2.5mm jack on a cell phone (using C-AT interconnect cable P/N 179.0693).
A phone connected to the ICRI will be used for dialing and other keypad functions since the
speaker and mic functions are disabled. Use the ICRI’s handset to talk/listen to the remote
individual, if using the ICRI as a base station.
INTERNAL 9V BATTERY: B
Housing holds a single, 9V, alkaline battery. A “fresh” battery will provide approximately 6 hours
of run time during full operation
DC INPUT JACK: C
This is a 2-pin locking-type jack is the input. Use the C-AT supplied power supply or contact C-
AT for additional power options. An eight “AA” battery pack is available for 30 hours of run
time, as well as AC or DC power option.
Pinout:
1 - +7 to +20 VDC
2 - Ground
Note: See appendix C for pinout.