CommTech FASTCOM 422/4-PCI, Справочник по аппаратуре

Страница: 12 / 21

6
HARDWARE INSTALLATION
Important: Observe Electrostatic Discharge (ESD) precautions when handling the Fastcom: 422/4-PCI
board.
1. Unpack the Fastcom: 422/4-PCI. Keep the box and static bag for warranty repair returns
.
2. Select an open PCI slot in your PC.
3. After removing the blank bracket from your PC, install the Fastcom: 422/4-PCI in the PC by pressing it firmly
into the slot. Install the bracket screw to hold it firmly in place.
4. Re-install the cover on your PC.
SOFTWARE INSTALLATION
Select the link above to open the Installation Manual. Under Fastcom – Async-PCI series cards, select your
operating system and follow the instructions. When you are finished, select Fastcom: 422/4-PCI from the list at
the end of the Fastcom – Async-PCI series cards section to return to this manual.
TESTING THE INSTALLATION
To fully test the installation of your Fastcom: 422/4-PCI, you will need to build a "loop back plug". Materials
needed are a DB9 male plug, solder cup style, and two short pieces of 20 or 24 AWG stranded wire. This loop
back plug can be used to test any RS-422 port. Jumper the pins together on the DB9 as illustrated below:
4 TX+
5
4
8
9
5 TX-
8 RX+
9 RX-
TESTING YOUR FASTCOM ASYNC PCI PORT IN WINDOWS
These instructions assume that you have already installed the card and have followed the installation instructions.
The SERIALGT.EXE program (98, NT) or the Device Manager (2K, XP) should show the boards/ports that are
installed, and the COM numbers assigned to those ports.
1. Attach the “octopus” cable supplied to the DB37 connector. Install the loopback plug on the port to test.
2. Find and run the TTY example program (simple terminal).
From the Start menu, choose Run, browse to and select D:\Fastcom_disks\AsyncPCI\tty\tty2.exe.
Click the Open button.