manualshive.com logo in svg

CommTech Fastcom 232/4-LPCI-335, Справочное руководство

Поделиться
Скачать
CommTech Fastcom 232/4-LPCI-335 Скачать руководство пользователя страница 9

5

 

 

 

INSTALLATION 

 

Hardware Installation 

 

Important:  Static electricity can harm system boards. Perform service at an ESD workstation and follow 
proper ESD procedure to reduce the risk of damage to components. Commtech, Inc. strongly encourages 
you to follow proper ESD procedures, which can include wrist straps and smocks, when handling 
Fastcom: 232/4-LPCI-335 boards. 

 

1.  Turn off PC power. Disconnect the power cord. 

2.  Remove the PC case cover (if applicable). 

3.  Unpack the Fastcom: 232/4-LPCI-335.  Keep the box and static bag for warranty repair returns

.

 

4.  Select an open PCI slot in your PC. 

5.  After removing the blank bracket from your PC, install the Fastcom: 232/4-LPCI-335 in the PC by 

pressing it firmly into the slot.  Install the bracket screw to hold it firmly in place. 

6.  Re-install the cover on your PC. 

7.  Refer to Software Installation in the next section for information on installing the software for the board. 

 
 

Software Installation 

 

1. 

Click here

 to open the Installation Manual located on your Fastcom CD.  If you do not have the Fastcom 

CD, you can 

click here

 to download the installation manual from our web site. 

2.  Find Fastcom-Async-PCI-335 series cards select your operating system and follow the instructions to 

install the software for your board. 

3.  When you are finished, select Fastcom: 232/4-LPCI-335 from the list at the end of the Fastcom-Async-

PCI series section to return to this manual. 

 

Содержание Fastcom 232/4-LPCI-335



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды