commtech wireless 4130, Руководство пользователя

Страница: 9 / 15

Manual 4130 Pager
©
Commtech Wireless
Page
9
3.2 Managing Messages
3.2.1 Reading Stored Messages
1. Press the Read Key to read the latest stored messages.
2. Keep pressing the Read Key to scroll through all stored messages. The
Time Stamp display always appears at the end of each message to show the
time, date and address properties of the message.

NOTE: If a message is longer than the screen width, the icon will be displayed on the LCD to
indicate it. To view the rest of the message press the Read Key.
3. If there are no pages currently stored, the LCD will show No Pages and return
you to the Standby Screen
3.2.2 Reading a New Message
When the pager is being used, it will typically be at the Standby Screen awaiting a page.
1. When a page is received it will alert the user, depending on the pagers current
alert settings. (See later on in this manual for information on alert settings).
2. To stop the pager from alerting you about the received page, press any key.
3. The received page will then be shown on the LCD screen.
4. When you have finished reading the message, press the Escape Key to
return to the Standby Screen.

NOTE: The Unread Message icon appears whenever there are stored messages in the pager
that have not been read. Press the Read Key to view any unread messages.

NOTE: If the current message is a repeated message, the Duplicate Message icon will
appear.

NOTE: The 4130 pager can store up to 20 messages. If a new message is received whilst the
pager has 20 stored messages, the oldest message gets deleted to make room for the new
message.
3.2.3 Protecting a Message
Protecting a message is used when you wish to prevent a message from being deleted.
Follow the directions below to protect a message.
1. Whilst the message is being displayed, press the Menu Key to display the
Delete Menu .
2. Using the Menu Key, scroll through the menu until Protect is found.

NOTE: The Escape Key can be pressed while in the Delete Menu to return you to the
Standby Screen without protecting any messages.
3. Press the Read Key to confirm your choice. The Message Locked icon
will appear on the LCD screen to confirm the message is locked. Press the
Escape Key to return to the Standby Screen .