FIGURE 8 Click the serial number of your device or click Register
Smart Device
FIGURE 9 Enter your device’s serial number and click Register
Smart Device
8. Click the + License button (see Figure 10), enter the number
of licenses to add in Qty to Add, and click the Add License
button (see Figure 11). Repeat for all licenses.
FIGURE 10 Click + License
FIGURE 11 Enter the number of licenses to add in Qty to Add
and click Add License
You have completed activating a SZ300’s licenses.
Step 6: Sync the SZ300 with LiMAN
After you have activated the SZ300’s licenses on the Support
Portal, the SZ300 must be synced with the Smart License server.
This will enable the User’s ability to assign licenses to and back
from a SZ300 or assign them to another SZ300.
To physically manage the distribution of licenses from the Support
Portal to the actual SZ300, do one of the following:
• Connect the SZ300 directly to the Internet. On the SmartZone
web interface, go to the Administration > License page, and
then click the Sync License with Server button to sync the
SZ300 with the SmartLicense server.
FIGURE 12 Sync the SZ300 with the SmartLicense server
• In the event that the SZ300 is disconnected from the Internet,
you can download the actual licenses from the Support Portal
and manually upload them to the specific SZ300. See the
Syncing Licenses on an Offline (No Internet Connection) SZ300
section.
You have completed activating the capacity or support license for
the SZ300 device.
Syncing License on an Offline (No Internet Connection)
SZ300
1. On the Add License page of LiMAN, click the SZ300's serial
number. The View Device page appears, as shown in the
following figure.
FIGURE 13 The View Device page
2. Click Download License File.
The license file is saved to the client.
3. On the SZ300 web interface, go to Administration > License.
In the Upload License section (see
on page 4), click
Copyright
©
2021 CommScope, Inc. All rights reserved.
Page 4 of 5
Published January 2021, Part Number 800-72217-001 Rev J
