CommScope Quareo HDEP Series, Руководство пользователя

Страница: 4 / 16

TECP-90-801 • Issue 4 • October 2017
Page 4
© 2017
CommScope
. All Rights Reserved.
1 PRODUCT DESCRIPTION
1.1 Physical Description
The Quareo High Density Equipment Panel (HDEP) is a fiber optic connector panel with six
access trays, each providing a mounting location for one adapter pack or cabled module. A
single access tray provides 24 LC connections for a panel total capacity of 144 LC connections.
The panel has mounting brackets intended for a 19-inch (48. 26 cm) rack-mount. Extender
brackets configure the panel for an ETSI or 23-inch (58.42 cm) rack-mount. The panel is
shipped with the ETSI extender brackets already installed. The panel may also be mounted in a
cabinet providing a 19-inch, 23-inch, or ETSI rack mount configuration.
This panel contains electronics that enable connection information to be acquired and supplied
to the Infrastructure Configuration Manager (ICM), the central system software of the Quareo
physical layer management system. Refer to
Topic 1.2 on Page 5 .
Figure 1 shows the main physical features of the 1RU panel, including the following:
• Access trays— hold adapter packs or cabled modules; open to front or rear of the panel.
• Access tray doors— protect adapter pack or cabled module when access tray is closed.
• Designation cards— are used to record cable destinations.
• QR code— is a label with a pattern recognizable by a visual recognition app on a smart
phone. The QR code causes the smart phone to link to the CommScope Field Support
Link, which contains user instructions specific to the 1RU panel.
QR CODE
CABLE
MANAGEMENT
LINKAGE
25316-C
RACK
OFFSET
ADJUSTMENT
SLOT
RACK
OFFSET
SCREWDOWN
LOCATIONS
ACCESS
TRAY
MOUNTING
BRACKET
(WITH
EXTENSION)
GROUNDING
LOCATION
ACCESS TRAY
DOOR (4X)
VERTICAL CABLE
GUIDE (4X)
(PROVIDED)
SHIPPING
BRACKET (2X)
REMOVED
BEFORE
INSTALLATION
DESIGNATION CARDS
(LOCATED ON
BACKSIDE OF DOOR)
Figure 1. Quareo HDEP Physical Features