CommScope PFU-P-E-O-060-01, Руководство пользователя

Страница: 5 / 27

1-Port 5Gb PoE Extender Manual
Rev A 1
1. Notices
In support of Low Voltage Directive 2014/35/EU this notice contains safety information important
for the correct installation and operation of this equipment.
Note, the term SELV (Safety Extra Low Voltage) used in this addendum is defined strictly in
accordance with IEC 62368-1.
Electrical Safety
1.
This equipment is intended for installation by trained service personnel only.
2.
The safety requirements for Information Technology equipment is only valid if the building
installation is in compliance with relevant national or international safety standards and in
accordance with good engineering practice.
3.
Remove the DC supply from the supply cable at source before changing supply
connections to this product.
4.
Unless otherwise specifically stated in the equipment installation manual, all data and
control ports are connected to ES1/SELV/NEC Class 2 conformant circuits inside the
enclosure. To maintain all the ports on the equipment at SELV/NEC Class 2, it is essential
that if any connection is made to any of these ports by other equipment, the other
equipment must maintain its relevant port at ES1/SELV/NEC Class 2.
General
1.
Unless otherwise stated in the equipment manual, there are no user serviceable parts
inside this equipment.
2.
Ultimate disposal of this equipment must be carried out according to relevant national
laws.
3.
The equipment should be installed by suitably trained personnel, and installation should
follow good working practice.
4.
The product Earth point serves as a discharge path for power surges or lightning events
on the supply or Ethernet cables, and must be bonded to Earth ground.
5.
Note: All wiring that connects to the equipment must meet applicable local and national
building codes and network wiring standards for communication cable.