1
What’s in the box
The outdoor Radio Point (RP) ships with the following hardware:
•
Radio Point with mounting plate and brackets attached
•
Four mounting screws (M5 x 10mm)
•
RJ45, IP67 connector
•
Two N-type antenna couplers
Mounting the Radio Point (RP) on a pole requires the following hardware provided by
the system integrator:
•
Two adjustable clamps
Mounting the Radio Point (RP) on a wall requires the following hardware provided by
the system integrator:
•
Four molly screws capable – 50 lb (23 kg) minimum rating
Before installing the RP on the pole, terminate the RP end of the Ethernet cable with
the RJ45, IP67 connector provided in the box.
NOTE
For more information on installing Radio Points, see
OneCell Installation and
Commissioning
(913025).
