CommScope FMT-D, Руководство пользователя

Страница: 3 / 20

ADCP-90-451 • Rev C • October 2020
Page 3
© 2020, ComScope, Inc.
• ETSI, 20.28-inch (51.5 cm) with mounting brackets for mounting in 40mm recess
Customer adjustable recess configurations include:
• EIA or WECO, 19 or 23-inch (48.26 or 58.42 cm) FMT offer 40mm (1.57-inch), 2.2-inch
(5.59 cm), 3.1-inch (7.9 cm), 5-inch (12.7 cm), or 6.5-inch (16.5 cm) recess;
For reference, Figure 1 shows one of the FMT configurations, the 12-position termination and
storage tray. Some of the features common to all FMT configurations are displayed.
Figure 1. FMT Features (12-Position Termination and Storage Tray, Universal Entry, Shown)
The features shown include the following (from bottom left clockwise):
• Edge Protectors —Protect cables from sharp angles at bend points.
• Release Tabs —Allows the FMT tray to open.
• Lock Open Latch —Allows the technician to lock open the FMT while working in the tray.
• Rear Radius Limiters (Left and Right) —Maintain a protective, minimum-bend radius
for cables routed into panel.
• Tie Lances —Provide anchor points for securing fibers.
• Storage Radius Limiters —Provide service loop storage for cable terminated in panel.
• Mounting Brackets —Adapt the tray for the different mounting options. Brackets may by
mounted in several recess locations based on customer needs.
LEFT REAR
RADIUS LIMITERS
LOCK OPEN
LATCH
RIGHT REAR
RADIUS LIMITERS
EDGE
PROTECTORS
(2 EACH SIDE)
SLIDING
ADAPTER
PACKS
STORAGE
RADIUS
LIMITERS
MOUNTING
BRACKET
(2 PLACES)
SLIDING RADIUS
LIMITER (2 PLACES)
23738-A
TIE LANCES
(EACH SIDE)
RELEASE
TAB
RELEASE
TAB