10.7 Horizontally place the Fig.8 cable and use cable
tie to fix the cable as shown.
10.8 Remove the excessive dummy rod and place the
remaining dummy rods back into its original
position.
10.9 Close the lid, screw the center screw and latch the
top cover, as shown.
Visit our website or contact your local CommScope ® representative for more information. www.commscope.com
FOSC, SMOUV, CommScope and all trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope,
Inc. © 2018 CommScope, Inc. All Rights Reserved
This product may be covered by one or more U.S. patents or their foreign equivalents. For patents, see www.cs-pat.com
For technical assistance, customer service, or to report any missing/damaged parts, visit us at: http://www.commscope.com/SupportCenter
.
