© 2019 CommScope, Inc. All rights reserved.
Visit our website at www.commscope.com or contact your local CommScope representative or BusinessPartner for more information.
All trademarks identified by ® or
™ are registered trademarks or trademarks, respectively, of CommScope, Inc. A997-0086 G (5/19)
Page 3 of 8
A997-0086
Table 1: Mounting Kit Part Numbers for Different Lengths of Antenna
Assemble kit as per Figures 2 & 3 of this document
1. Attach the kits assembly to the antenna, before trying to clamp the
brackets to the pole.
For typical installations of antennas up to 1400mm (55.1") long the minimum
recommended pipe diameter is 60mm (2.4"). For antennas over 1400mm
(55.1") up to 1800mm (70.9") long the minimum recommended pipe diameter
is 75mm (3").
Mounting Kits
850
– 1400mm
(33.5” – 55.1”)
Antennas
1400
– 1800mm
(55.1” – 70.9")
Antennas
Fixed Downtilt
F-042-GL-E
F-042-GL-E
Mechanical Downtilt
T-045-GL-E
T-041-GL-E
Do not install near power lines.
Power lines, telephone lines, and
guy wires look the same. Assume
any wire or line can electrocute you.
Do not install on a wet or windy day
or when lightning or thunder is in
the area. Do not use metal ladder.
Wear shoes with rubber soles
and heels. Wear protective
clothing including a long-sleeved
shirt and rubber gloves.
Figure 1: Correctly Assembled
Mounting Bracket for
Fixed Downtilt Antenna
Installation Instructions - Fixed Downtilt Mounting Kit for up to
1800mm (70.9") Antennas - (F-042-GL-E)
