Installation Instruction for CMAX Antennas
Page 4
M0149APB_Installation_CMAX-xxx-Antennas
3.2. Optional Pole Mounting Kit
Optionally, a pole-mounting kit can be ordered separately from the supplier (ID 7814722).
The recommended pole diameter for this mounting kit is 60 - 150 mm. To mount an antenna
to a pole using this kit, proceed as follows:
1. Insert the four bolts M8x200 (2) with four of the filet washers (5) into the antenna
mounting bracket (see detailed illustration of bolt head).
2. Insert the pole mounting bracket into these four bolts and place the filet & spring
washers (4 & 5) and the M8 nuts (3) over each bolt (detailed illustration).
3. Tighten the four M8 nuts observing the specified torque of 27 Nm.
4. Hang in the safety wire (6) and attach it to a suitable structure for fall protection.
