Installation Instruction for CMAX Antennas
M0149ABC_Installation_CMAX-O-xxx-Antennas
Technical Support:
http://www.commscope.com/wisupport
3. Adjust the locking ring to fasten the
antenna mount to the ceiling.
4. Remove the four films on the surface of
the mounting tape.
5. Attach the radome to the upper holder
as outlined to the left.
Version
Changes
Release Date
M0149ABA
15-November-2016
M0149ABB
- part number for ceiling mount kit added
22-November-2016
M0149ABC
- CMAX-O-UW-i53, bending radius, and mounting kit added
04-May-2020
© Copyright 2020 CommScope, Inc.
All rights reserved.
All information contained in this manual has been revised thoroughly. Yet CommScope accepts no liability for any omissions or faults.
CommScope reserves the right to change all hardware and software characteristics without notice.
Names of products mentioned herein are used for identification purposes only and may be trademarks and / or registered trademarks of
their respective companies.
No parts of this publication may be reproduced, stored in a retrieval system, transmitted in any form or by any means, electronical,
mechanical photocopying, recording or otherwise, without prior written permission of the publisher.
CommScope, 04-May-2020
Locking Ring
Mounting Tape
