Bulletin D701-0013
• Revision C • November 2014
page 3 of 5
296mm Profile Panel Antennas
Figure 2: Exploded Assembly for Upper Mounting Bracket using Clamp Bracket
Figure 3: Exploded Assembly for Lower Mounting Bracket using Clamp Bracket
(This configuration should also be used for the upper Mounting Bracket when 0° tilt is required)
Figure 4: Typical Example of Upper Bracket Placement for Various Downtilts
OPTIONAL
: THE TILT ARM AND EXTRA HARDWARE
CAN BE STOWED IN THE POSITION SHOWN WHEN IN
0° DOWNTILT CONFIGURATION
USING A CLAMP
BRACKET.
A
