www.commscope.com
Instruction Sheet 860532050
Issue 4, July 2014
QWIK MPO Termination Instructions
© 2014 CommScope, Inc. All rights reserved
Page 1 of 13
General
The
CommScope
®
QWIK MPO Termination Kit and Connector Kit, with the Splicer Kit (ordered separately)
facilitate the proper termination of
CommScope
®
QWIK MPO connectors. Field termination of 12F MPO
connectors onto 3mm round 12 fiber loose-tube cordage is accomplished by following this method.
Ordering information is listed below:
Connector Kits
Material ID
Part No.
Description
760163931
SFC-12MX-8SP-30-GR
SMAPC male, green 3mm round
760163949
SFC-12MP-8SP-30-GR
SMAPC female, green 3mm round
760163956
MFC-12MX-5SP-30-AQ
MM OM3 male, aqua 3mm round
760163964
MFC-12MP-5SP-30-AQ
MM OM3 female, aqua 3mm round
760163972
MFC-12MX-6SP-30-BG
MM OM1 male, beige 3mm round
760163980
MFC-12MP-6SP-30-BG
MM OM1 female, beige 3mm round
Parts List
– Connector Kit includes:
Quantity
Description
1
Boot/furcation tube
1
Spring
1
Ferrule subassembly with cap
1
Outer housing
1
Spiral wrap
1
Protection sleeve
Qwik MPO Termination Kit
Material ID
Part No.
Description
760188698
460143027
QWIK MPO termination kit
Parts List
– Qwik MPO Termination Kit includes:
Quantity
Description
1
Assembly platform with fiber arrangement tool (ribbonizer)
1
Fiber stub connector holder
1
Fiber ribbonizing glue
(Qwik MPO Termination Kit Parts List is continued next page)