Comms365 C365-4G-H685 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 60

Comms365 C365-4G-H685 Скачать руководство пользователя страница 40

40

C365-4G-H685 User Manual CB-V1 (March 2020)

www.comms365.com | 01234 865880 | [email protected]

3.6.2 Mobile configuration

The system supports different cell modems. By default, the router is set up with the correct Cell
Modem name before shipment. If you change to a different Cell Modem, if it is supported, the router
will automatically detect the new Cell Modem.

Notes:

The Cell Modem Type was marked on the back of the router.

For example, see the following picture. H685t-W is the router model. SLM750TE is the Cell Modem
name.

•

Enable:

Enable the mobile network;

•

Mobile connection:

Select a suitable mode for the mobile to connect, for the cell modem

only supports 3G, the default mode is pppd mode, otherwise the default value is DHCP mode;

•

APN:

Fill in the related parameters. Get this parameter from the SIM Card Provider or Carrier;

•

PIN number:

If necessary, fill in the related parameters. Most SIM cards have no PIN code, and

so keep this field blank;

•

Dialing number:

Fill in the related parameters. Get this parameter from the SIMCard Provider

or Carrier;

•

Authentication method:

Three options (None, PAP, CHAP). Please confirm your carrier provider

and the types of authentication. Normally select None. If this option does not work then try
PAP or CHAP;

•

Username:

Fill in the related parameters. Get this parameter from the SIM Card Provider or

Carrier.

Notes:

If your SIM card has no username, please input our default value, otherwise the router

may not dialup.

«
...
38
39
40
41
42
...
»

Содержание C365-4G-H685





























































Отзывы:

Нет отзывов