Commodore Skylark CO-190, Руководство пользователя

Страница: 10 / 23

OWNERS MANUAL STUDEN CANOPY COMMODORE
12. Separate the control lines, straighten the fabric between them and turn them towards the
center of the canopy under the slider (pic. 9 and 10)
13. Take the trailing edge of the canopy in your hand at central part (where the warning label is
attached) and put it on the lines right below the slider, press it hard along with the lines and the
slider (pic. 11)
14. Straighten the tail to the sides and coat with it the canopy towards the nose so that the control
lines stay at the center of the canopy (pic. 12)
15. While holding the lines and the slider tight, connect the ends of the trailing edge and roll the
tail. Be cautious not to capture into the roll the other parts of the canopy left inside. (pic. 13
and 14)
16. Keep eye on the slider position and lines tense, slightly swing the bundle, lay it down on the
floor and carefully squeeze the air out (pic. 15)
17. Make an S-fold of the required size and push it into the deployment bag.
18. Close the deployment bag and stow the lines, leaving 60 – 70 cm unstowed to prevent line
twists (pic. 18)
10