Commodore CASSIOPEI, Руководство пользователя

Страница: 18 / 76

2.6 Settings file
You may configure the most important settings by pressing the “Sett.”-button on the Cassiopei. Other
settings like the hostname (the name shown in your router), the IP-address or virtual file mode settings,
NTP server settings, etc. can only be changed by modifying the contents of the settings file. Below the
contents of a settings file. You can modify this textfile using any kind of text editor, for example the
application “Wordpad” on MS Windows is very useful. Everything after the character ';' will not be
interpreted by the Cassiopei and can be effectively used for comments. Please be aware that there are
some size limitations, these are indicated close to the relevant entry.
The settings file is located on the card in the folder “_system_” and is named “SETTINGS.TXT”.
;Cassiopei settings file
;-----------------------
WIFI=1 ;Enable wifi (0=OFF, 1=ON)
;ATTENTION: HOSTNAME, SSID and KEY value may NOT exceed 32 characters
HOSTNAME=CASSIOPEI
;
SSID_1=MYPERSONALNETWORK
KEY_1=0123456789AA
;
SSID_2=MYWORKNETWORK
KEY_2=0123456789AB
;
SSID_3=MYFRIENDSNETWORK
KEY_3=0123456789AC
;-----------------------
NTP=0 ;Enable NTP client (0=OFF, 1=ON)
NTPSERVER=time.nist.gov ;example: time.nist.gov
TIMEZONE=7200 ;deviation from UTC in seconds (add 3600 to correct for DST)
;-----------------------
COMPUTERMODEL=0
MODE=1
USERPATH=
FILENAME=pacman.prg
VIRTUALHOST_IP=192.168.2.8
VIRTUALHOST_PORT=80
VIRTUALHOST_FILE=virtual.prg
;-----------------------
ALARM_OVERVOLT=1
;-----------------------
;
;Note:
;-----
;If you are not certain about a setting and
;want to go back to the default value.
;Then remove the related line from this file,
;the Cassiopei will detect that it is missing
;and will create the missing setting line
;into this file after you enter the menu and
;exit with: exit+save
2019-10-27 Page 18 of 76 CASSIOPEI v2.0