Dual socket configuration
This is easy no-soldering solution for stereo SID expanders (MixSID, SIDFX,
SID2SID etc.) or dual-SID boards.
Install the ARM2SID in the primary socket, SID2 in the secondary socket and
connect them with the provided 5 or 10 cm cable.
Take care for the proper
ARM2SID and SID2 orientation! Wrong orientation will destroy your
computer!
Configure ARM2SID with the provided ARMSID TESTER utility. Start it,
choose $D400 SID, select M for ADDRESS MAPPING CONFIGURATION and
select PIN CONNECTION: SOCKET, then choose what to play in the LEFT and
RIGHT socket. If your socket supports $DFxx addressing, you can use SFX
(FM) too.
