5
User manual Tango VII 1e
NO
EN
NO
EN
6
User manual Tango VII 1e
NO
EN
NO
EN
Congratulations
Congratulations with your new Tango VII. We hope you get a lot of
pleasure from this solution which gives you better sound from your
landline phone.
This user manual will ensure you get started so that you can get the
most out of your new solution. Your local dealer offers a range of
accessories which will further enhance the functionality of this product.
Never attempt to dismantle the product yourself. Only approved local
dealers or service centres may open the products. Contact your local
dealer if any parts of the unit need replacing.
Keep out of reach of children:
The plastic packaging of the product and accessories are not children’s
toys. The packaging or the small parts it contains may cause choking if
swallowed.
Ignition of flammable atmospheres
Do not use Tango VII in environments where there is a danger of igniting
combustible gasses.
About Tango VII
Tango VII is a wireless Bluetooth transmitter for desk telephones. It
transfer audio wireless t a Blues II/Maestro or other Bluetooth compa-
tible products.
See the illustrations on page 2 for an explanation of the points below
Selector for telephone handset
•
1
:
Applied to receive the phone call through the telephone handset.
Selector for dialogue mode
•
2
:
This function is not available on Tango VII.
Selector for neck loop
•
3
:
Applied to receive the phone call through the Blues II/Maestro.
Volume control for the telephone handset
•
4
a/b:
Adjusts the volume of the conversation through the
telephone handset.
Volume indicatior for the telephone handset
•
4
c:
Indicates the volume of the conversation through the
telephone handset
Configuration button
•
4
d:
Used for configuration of the Tango VII, This is done to get correctly
communication with your telephone
Pairing button
•
4
e:
Sets the Tango VII in pairing mode.
Tone adjustment for telephone receiver
•
5
:
Adjusts the tone level of the conversation through the
telephone handset.
Volume control for neck loop
•
6
a/b:
Adjusts the volume of the conversation through Blues II/Maestro.
Volume indicatior for neck loop
•
6
c:
Indicates the volume of the conversation through Blues II/Maestro.
Microphone sensitivity button
•
6
d:
Applied to adjust the microphone sensitivity in Tango VII/Maestro.
Tone adjustment for
•
neck loop
7
:
Adjusts the tone level of the conversation through Blues II/Maestro.
Communication light
•
8
Shows if Tango VII is connected to Blues II/Maestro
Input for the telephone handset
•
9
:
This is where you connect the telephone handset of
your desk phone.
Input for the desk phone
•
10
:
This is where you connect you desk phone, with the enclosed cable.
Input for handset lifter (accessory)
•
11
:
This is where you connect the handset lifter, which enables you to
answer the phone call remotely via your Blues II/Maestro.
Audio output
•
12
:
This is where you connect e.g. external telecoil amplifier etc.
Dialogue input
•
13
:
Not available on Tango VII
Power input
•
21
:
Connection for the accompanied power supply.
