Page 8
Safeguards & Safety Operating Instructions
Operating the Soup Warmer
Before operating Soup Warmer, it should be checked to see that it is sitting level.
NOTE: Always wipe down the outer surface of the
inner pot before placing it inside the warmer. Any
moisture remaining on inner pot surface may
cause a crackling noise while the unit is heating
up. Except for actual cooking area, keep all
surfaces dry to prevent damage to the inner
working of the appliance while it is in operation.
• Wash inner pot and lid in warm soapy water. Rinse and dry thoroughly.
• Never immerse outer pot in water.
• Always place inner pot inside outer base before plugging in the Soup Warmer.
• When plugging in the warmer, always be sure base pot contains at least 2.5 cups of water.
• Save these instructions and refer to them often.
Operating Instructions
USE:
1. Connect the appliance to the main power supply.
NOTE: NEVER
place empty inner warming pot into the warmer.
CAUTION-To ensure continued protection against risk of electric shock, connect to properly grounded outlets only.
If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
This equipment is for COMMERCIAL USE ONLY - See Diagram below for visual instructions.
2. Pour water into base of Soup Warmer no higher than the maximum water line marked on the inside of the base.
Make sure to check the water level of the warmer every 3 hours or so. Turn off unit, let cool and refill
as needed.
3. Place soup pot into metal ring provided.
4. Slowly lower pot into base using ring to secure.
