Page 10
Safeguards & Safety Instructions
TO AVOID SERIOUS PERSONAL INJURY:
•
DO NOT
operate the grill before reading the instruction manual first.
•
ALWAYS
disconnect or unplug electrical power before cleaning, servicing or adjusting any parts or
attachments.
•
NEVER
bypass, alter, modify or attach any unauthorized parts to this equipment.
Doing so may create hazards and will void warranty.
•
NEVER
operate grill with a damaged power cord or plug.
•
NEVER
leave the grill on overnight.
•
NEVER
use the grill as a heating source for your kitchen, space, or room.
•
ALWAYS
keep hands, hair and clothing away from heating plates.
IMPORTANT SAFEGUARDS & SAFETY INSTRUCTIONS
When using electrical food equipment, basic safety precautions should always be followed,
including the following:
• Do not touch hot surfaces. Use handles or knobs.
• To protect against risk of electrical shock, do not put in water, dishmachine or any liquid.
• Never directly touch the heating elements while the grill is on.
• Unplug from power outlet when not in use, before putting on or taking off parts, and before cleaning.
• Do not operate any equipment with a damaged cord or plug or after the appliance malfunctions or is
dropped or damaged in any manner. Call for service.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electrical shock
or injury.
• Do not use outdoors.
• Do not let power cord or the extension cord hang over edge of table or counter or to touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Do not use this equipment for any use other than the use intended by the manufacturer.
• Do not yank on any cord to disconnect.
• Never plug equipment in where water floods the area.
• Place the appliance on a firm, stable surface.
• The grill does not contain
any
user-serviceable parts. Commercial Pro product dealers or recommended
qualified technicians should carry out repairs. Do not remove any components or service
panels on this product.
• We take every care to ensure that all products are safe. Steel cutting procedures used to manufacture
these items result in sharp edges. These sharp edges are removed to the best of our ability; however, we
insist the operator take care when in contact with this piece of equipment.
• During operation the grill reaches high temperatures, in turn, heating any stainless steel surfaces.
Take extreme care when operating. Only handle the grill by its’ handles to eliminate accidents.
• Switch off power and disconnect from the main / wall plug for cleaning.
• Allow the grill to cool down after use and before dismantling for cleaning; the unit will be too hot to
handle immediately after use.
• The grill is equipped for the voltage indicated on the nameplate mounted on the rear of
the unit. This grill is designed for use on alternating current (AC) only.
