Commercial Electric MB-50901, Инструкция по эксплуатации и уходу

Страница: 6 / 8

masonry blocks
Installing the mounting plate (concrete/masonry wall)
6
Attach the mounting plate (A) using the lag bolts (CC) and lag bolt washers (BB) as shown.
Insert anchors (AA) into the holes. Ensure the anchors are completely flush to the concrete surface even if covered
by a layer of joint compound or other material.
Use the mounting plate (A) as a template to mark the installation holes. Use a level to ensure the plate is level.
Use a
1
/
4
in. (6 mm) masonry drill bit to slowly drill 2.4 in. (60mm) pilot holes.Then use a 3/8 in. (10 mm) masonry
drill bit to expand pilot holes.
AA
BBCC
Installation (continued)
masonry block.