2
4. Connect the hot and neutral wires from the J-box into the wire connectors (DD) of the black and white wires from the fixture
base (A). Insert the ground wire from the J-box into the wire connector (DD) of the green wire from the fixture base (A). Make
sure to fasten them well.
InSTallaTIOn
5. On the other four location holes of surface, insert the mounting screws (AA), please be noted that do not screw in them whole
at begin. And make the mounting screw (AA) head cross the wide holes on the two sides of fixture plate (A), and slide the base
towards the narrow hole, and fasten these screws well.
6. Power on , select CCT as well.
notICe:
Pull the lamp color temperature toggle switch
to the desired color temperature gear (as shown below, 3000 K
left 4000 K right 5000 K)
BB
A
A
AA
AA
CC
7. Make the safety rope (C) of fixture base (A) hook on the
external frame (B), attach the frame (B), complete the installation.
CaUtIon
:
Do not press on the safety rope (C) of fixture
base (A) When attach the frame (B).
3. Fix the two safety ropes (DD) by screws (AA) on the middle holes of surface, then hook with the fixture plate (A) through the
hole on the middle.
DD
A
AA
C
B
A
3000K 4000K 5000K
