Installation Guide
TV Multimedia Recessed Box
Item #1001863174
Model #5053-WH
CAUTION:
When using tools always follow the
manufacturer’s safety guidleines.
Please read all instructions and safety information before use.
Retain this manual for future reference.
ETL LISTED
CONFORMS TO
UL STD 514C
□
6
□
7
Run the source of power to the included old work electrical box by
pushing in one of the tabs to create an opening. Be sure to follow all
local electrical codes. Wire an electrical receptacle (not included) to
the old work electrical box and secure the electrical box to the posts
on the back of the multimedia box using the included screws.
Before installing the Multimedia Box into the template opening,
make sure to pull your low voltage cables through the low voltage
cable opening.
Starting with the receptacle side of the Media Box, slowly slide it
into the opening on the wall. Swing the opposite side of the Media
Box into position until the entire Media Box is flush with the wall.
Secure the screws with wings; these fasten tightly against the
back of the drywall.
CONNECTING THE RECEPTACLE (NOT INCLUDED)
INSTALLING THE MULTIMEDIA BOX
Electrical Wir
e
□
Your new Multimedia Box is now installed and ready for the
TV mount to be installed. Install your TV mount bracket (not
included) per the TV bracket manufacturer’s instructions.
HANG TV AND ENJOY
□
Safety Information
F
A
5
TV
Installation Continued
