4
Pre-Installation (continued)
ENSURING THE WALL STABILITY
Carefully inspect the wall area you have selected. Examine the wall surface before you begin drilling.
WARNING:
Do not drill near electrical wiring and water pipes.
CAUTION:
Wood studs must be no smaller than 2 x 4 in. in size. Ensure the surface covering does not exceed 5/8 in.
CAUTION:
Concrete walls must have a minimum thickness of 5.5 in. Ensure the surface covering does not exceed 3/8 in.
CAUTION:
Do not install this product on a concrete block.
For concrete walls, check for damaged or loose concrete and do not drill in those areas.
For brick walls, never drill into the mortar between the blocks.
For wood studs, locate the wall studs and drill in the center of the stud.
TOOLS REQUIRED (NOT INCLUDED IN THE PACKAGING)
Power drill
1/8 in. (3 mm)
wood drill bit or
3/8 in. (10 mm)
masonry drill bits
Phillips
screwdriver
Measuring
tape
Pencil
Hammer
Socket tool
Toothpick
