5 HOMEDEPOT.com
Please contact 1-877-527-0313 for further assistance.
Installation (continued)
2
How to use included connectors
□
The wire lead (AA) and corner connectors (BB) are used to join two sections of LED tape.
□
Open the lid of the connector opposite the wire.
□
Peel about ¼ inch of the paper from the LED strip adhesive backing at the connection point.
□
Use a gentle side-to-side motion to slide the strip into the connector, making sure the tape slides under the
internal connector contact points.
□
Close the connector door firmly.
□
Perform a power test to be sure the connection is secure. If the LEDs flicker or do not light, repeat the
steps in this guide.
Insert tape into channel
under contact tabs
Be sure tape slides
into channel groove
Press down lid
until it snaps closed
AA or BB
AA or BB
AA or BB
3
Soldering the LED tape (optional)
□
Soldering is another method for joining wires to the tape light and joining sections of tape light directly
together.
Wire Lead Connection
Splice Connection
Electric iron
LED tape
Wire
Electric iron
LED tape
