Page 9
CARE AND CLEANING
Remove the plug from power supply. Remove the jug from the power base before
cleaning and separate the lid and silicone ring from the jug.
CAUTION:
Never immerse the jug or the base into water. Do not place in the
dishwasher.
1. THE JUG: Clean immediately after each use. Flush and clean the walls using warm
soapy water and a non-abrasive cloth. Then dry with a soft cloth.
CAUTION:
Do not place in the dishwasher.
2. THE LID: Separate the lid and the silicone ring from the jug. Wash out with water
and then dry completely before reassembly.
3. THE BODY: Clean with a soft cloth.
CAUTION:
Never use harsh cleaning agents or hard nylon/metal brushes to avoid
scratches on the stainless steel surface! Never clean with metal objects
and never use abrasives.
4. THE WHISKS: Remove from the jug. Wash with warm water. Dry and store in a
safe place. We recommend you use the molded grooves on the underside of the
lid for one and secure the other in the inside bottom of the jug.
5. Use a small brush to clean the gap under shaft sleeve of motor where whisk sits.
6. Affix the spiral whisk back in place, add liquid into jug but do not exceed MAX
line. Follow instructions above for frothing cold milk.
CLEANING & CARE
