9
3.
Ensure that the power cord and audio cabling is installed in
the wall to the amplifier installation location.
4.
Punch open needed holes in the back can, then pull the
cables through the hole(s). Be sure to keep the power cord
as far as possible from the audio cables.
5.
Fit the back can into the hole, then use self-tapping screws
(not included) to secure it to at least one stud or frame.
6.
Select two buckles in either the A or B direction, as
indicated in the image below. Pull the outer edge of it so
that the snap is disengaged. Carefully disconnect the front
panel from the amplifier base.
7.
Make all audio and control connections to the amplifier
connectors. Be sure to match polarity for all connections to
ensure proper function and quality of sound.
