Pre-notes for start-up
G8-IAX / G3-IAX
12
3.0/0616
Pre-notes for start-up
Speech channels
Individual configuration per channel
It is possible to carry out a separate individual configuration for each channel of the Gx-IAX card. This
means, a separate speech connection to a VoIP server with individual features is available for each
channel.
Example G8-IAX-4
The several channels of the G8-IAX-4 card are configured as follows:
1st channel:
with 6 pre-configured call numbers
2nd channel:
with password
3rd channel:
with 8 pre-configured call numbers and password
4th channel: used as “recorder” for
“Audio mixing for speech recording”
Dynamic channel allocation
The dynamic channel allocation applies to incoming calls to the Intercom system.
Schematic illustration of the dynamic channel allocation
NOTES: Dynamic channel allocation
A call from a VoIP phone to the Intercom system is always built up via the 1st channel of the respec-
tive Gx-IAX card.
If the 1st channel is busy (e.g. because of an existing conversation via this channel), the call will au-
tomatically built up via the next idle channel. This also means, the configurations defined for this
channel become effective for this call (e.g.
).
Gx-IAX-4
VoIP system
Channel 1 busy
Channel 1
Channel 2
Channel 3
Channel 4
Channel 2 busy
Channel 3 busy
Call
