Commend Audiocodes MP-11 Series, Руководство по установке

Страница: 7 / 20

Example MP11x FXO Setup Guide v1.6
Last Updated: 6/11/18 P a g e | 7

Waiting for Dial Tone = No
9. Tel to IP Routing (Analog call handling)
a.
Configuration > VoIP > GW and IP to IP > Routing > Tel to IP Routing
b. Here the incoming routing from the FXO ports to a specific IP address is defined. This is
only needed if calls should originate from the telephone side bound for SIP.
c. Example FXO configuration:

Src. Hunt Group ID = *

Dest. Phone Prefix = *

Source Phone Prefix = *

Dest. IP Address = [SIP UA, host, or device] (for example Linux IP of VirtuoSIS)

Port = 5060 (default)

Transport Type = UDP (default of any Commend device)

Dest. IP Group ID = -1 (any group)

IP Profile ID = 0 (use global)

Cost Group ID = None (only for FXS)