HE-760 User’s Manual Hardware Setup
Onboard Display Interface
24
To setup the LCD, you need the component below:
1. A panel with LVDS interfaces.
2. An inverter for panel’s backlight power.
3. A LCD cable and an inverter cable.
For the cables, please follow the pin assignment of the connector to make a cable, because
every panel has its own pin assignment, so we do not provide a standard cable; please find a
local cable manufacture to make cables.
LCD Installation Guide:
1. Preparing
the
HE - 760
,
LCD panel
and the
backlight inverter
.
2. Please check the datasheet of the panel to see the voltage of the panel, and set the
jumper
JVLCD
to +5V or +3.3V, and the
JBITSEL
for 18-bit or 24-bit.
3. You would need a LVDS type cable.
4. To connect all of the devices well.
For sample illustrator only
Panel side
Board side
Содержание UniChrome Pro HE-760
Страница 1: ...HE 760 Half size Embedded Miniboard User s Manual Edition 1 00 2005 4 20...
Страница 6: ...HE 760 User s Manual 6 This Page is Left For Blank...
Страница 11: ...HE 760 User s Manual Introduction Mechanical Drawing 11 1 3 Mechanical Drawing...
Страница 39: ...HE 760 User s Manual Flash BIOS PS 2 Keyboard Mouse Port 39 This Page is Left for Blank...
