Allows the motherboard's BIOS to detect whether you are using any audio/modem device. If a audio/modem device is
detected, the onboard audio/modem controller will be enabled; if no audio/modem is detected, the onboard
audio/modem controller will be disabled. If you want to use different controller cards to connect audio and modem
connectors, set these fields to Disabled.
3.5.8 IDE HDD Block Mode
This feature enhances disk performance by allowing multi-sector data transfers and eliminates the interrupt handling
time for each sector.
3.5.9 POWER ON Function
This field allows you to use the keyboard to power-on the system. To use this function, make sure JKBV is set to 2-3
On- please refer to " Keyboard Voltage Setting " in Chapter 2 for more information.
Any Key:
Press any key to power-on the system.
Button Only:
System can be power on with Power Button.
Keyboard 98:
When this option is selected, press the "wake up" key of the Windows 98 compatible keyboard to power-on the
system.
Password:
When this option is selected, move the cursor to the "KB Power On Password" field and press <Enter>. Enter
your password. You can enter up to 5 characters. Type in exactly the same password to confirm, then press
<Enter>.
Hot Key:
When this option is selected, move the cursor to the " Hot Key Power On " field to select a function key you
would like to use to power-on the system. The options are from Ctrl-F1 to Ctrl-F12.
Mouse Left:
When this option is selected, double-click the left button of the mouse to power-on the system.
Mouse Right:
When this option is selected, double-click the right button of the mouse to power-on the system.
3.5.10 Onboard FDC Controller
Select "Enabled" to activate the on-board FDC
Select "Disabled" to activate an add-on FDC
3.5.11Onboard Serial Port 1 & 2
Select an address and corresponding interrupt for the first/second serial port. The default value for the first serial port is
"3F8/IRQ4" and the second serial port is "2F8/IRQ3".
3.5.12 UART Mode Select
Select to activate the Infrared transfer function.
3.5.13 RxD , TxD Active
This option are Hi, Lo; Lo, Hi; Lo, Lo ; Hi, Hi.
3.5.14 IR Transmission Delay
If this option is enabled, transmission of data will be slower. This is recommended when you encounter transmission
problem with your device. .
3.5.15 Onboard Parallel Port
Select address and interrupt for the Parallel port.
3.5.16 Parallel Port Mode
Select an operating mode for the parallel port. Mode options are SPP, EPP, ECP and ECP+EPP.
3.5.17 EPP Mode Select