CommBox Interactive Classic, Руководство пользователя

Страница: 8 / 19

+61 2 9975 6001
8
1.
a.
b.
c.
d.
2 Setup
2.1 Remote Control Setup
2.1.1 Inserting batteries into the remote
• Press the tab on the battery case and open it.
• Insert the battery (1.5V AAA) into the battery case.
• Replace the battery case and push it down until clack sounds.
2.1.2 NOTICE:
• When loading the battery, check if the polarity of the batteries is correct.
• If you are not using the remote for long time, remove the batteries to prevent damage
caused by leaking battery fluid.
• Don't expose the battery to direct sunlight or excessive heat such as a fire.
• If anything obstructs the front of the IR receiver the remote may not work.
2.2 Touchscreen Setup
2.2.1 Turning on the power
1. Connect the power cable of the product into outlet with AC 100-240V 50 / 60Hz.
2. Turn on the main AC power switch.
3. If the power indicator is green, the screen turns on automatically.
4. If the power light is red not green, press the power button on the remote or on the bottom
right hand side of the touchscreen to turn on the power.
2.2.2 Changing language of the menu
• The menu's language is set to English as the default.
• Users can select alternative languages if required.
• To change the menu language,
Press the Menu button to open the menu.
Select Setup from the main menu.
Select Language of the Setup menu..
Scroll to the language you want to select and click OK, and then exit the menu.